VPN says connected but nothing loads?

Most VPN apps say “connected” as soon as the first exchange with the server, the handshake, is done. That does not prove your data can travel. A network can let the handshake through and quietly drop everything after it.

Why “connected” can be wrong

The handshake passes, the data does not. Some filters let a connection start and cut it once real traffic flows, or once it starts to look like a VPN. The app keeps showing the green state it reached a moment earlier.

Names do not resolve. Every website starts with turning its name into an address. If those lookups fail inside the tunnel, the connection is up but no page can be found.

Large packets get lost. On some networks small packets pass and large ones are dropped. Pages start to load and then hang, and only a few apps seem to work.

The server or its exit is busy or blocked. The tunnel to the server is fine, but traffic cannot leave it on the other side.

What to try

  1. Disconnect and connect again. If it helps for a minute only, the network is cutting the connection.
  2. Pick another server or another country.
  3. Switch to another way to connect, if your VPN lets you choose.
  4. Turn off any custom DNS setting and any other VPN, proxy or ad-blocking app that also filters traffic. Two of them at once often break each other.
  5. Restart the device, then try on another network to see whether the problem moves with you.

How ARXUM handles it

In ARXUM, “connected” means something stricter: your data has reached the ARXUM gateway and come back, checked with a real request, not only a finished handshake. Until that check passes, the app does not say “Internet works”.

If a way passes the handshake and fails the check, ARXUM does not show you a false green. It moves on to the next of its eight ways to connect and keeps the one that carries data. If a working way stops answering later, it recovers on its own: the saved way first, then new addresses delivered to the app, and a manual step only if both fail.

Get VPN